Tuesday, April 5, 2011

STS CONTRUCTION JOBS FOR OMAN


Current Openings
Contract Manager (Multi Disciplinary EPC Contract)
Degree in a relevant engineering Discipline (BSc / MSc / B. Eng.) and membership of an internationally acceptable professional institute.
Shall have minimum 20 years of relevant work experience, 5 years of which shall have been in a Managerial Position in a similar Multi Discipline Construction Contract. Shall have proven successful experience in all aspects of project development, management and general management.
Cv shall be sent to Mr. Khurram S. Sarwar at khurram@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647115
 
QA/QC Manager
Degree in Mechanical Engineering and IRCA registration. Minimum 15 Years of experience in QA/QC out of which 7 Years in managerial position. Shall have experience in implementing and maintaining a quality system in accordance with SP1171/ ISO 9001. Shall lead and guide a team of QA/QC on admin and technical matters.
cvs shall be sent to Mr. Kandasamy at kanda@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647292
 
HSE Manager
Degree or Diploma in Engineering and a NEBOSH Certificate or equivalent.Minimum 12 years of experience in HSE preferably in medium to large construction projects in oil, gas or power industry (of over 500 work force). Shall have membership to international safety organization such as IOSH, ASSE, IIRSM.
Shall have good communication skills and able to lead incident investigation, HSE audit and good in technical report writing.
Able to facilitate and develop Contract HSE Management Plans.
cvs shall be sent to Mr. Kandasamy at kanda@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647292
 
HSE Adviser
College Degree/Diploma and post college Diploma in Industrial Safety. Shall have at least 6 years of experience as safety professional in a construction project with multi-national workforce. Must have proven skills in communication, conducting job risk assessment, HSE inspection and audits, HSE topic training among work force, and communicating HSE messages to the
work force and staff.
Cvs shall be sent to Mr. Nomar at nomar@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647208
 
QC Inspectors – Civil
HND or Graduate Engineer (B.Sc. Eng. / BE / B.Tech/ HND) in Civil Engineering. Minimum of 4 years of quality control and inspection experience in construction industries (soil excavation and earth works, concrete works, block works, structural steel works and roofing, roads and paving, tank pads and bunds and general activities associated with civil and building works). Shall be thoroughly familiar with civil construction materials and construction methods, testing of civil construction materials, international codes and standards for civil design, construction and testing of materials and works.
Cvs shall be sent to Mr. M.A. Reji at reji@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Mob: Ph: 24647215
 
QC Inspector – Mechanical
HND/Diploma in Mechanical or Metallurgical Engineering. Minimum of 4 years of inspection experience in construction industries ( 2 years in oil and gas facility construction). Shall be CSWIP 3.1 / AWS-CWI . Certified ASNT level II in RT, PT, MT and UT techniques.
Cvs shall be sent to Mr. M.A. Reji at reji@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647215
 
QC Inspector – Electrical
Graduate Engineer (B.Sc. Eng. / BE / B.Tech/ HND) in Electrical engineering. Minimum of 4 years of quality control and inspection experience in construction industries. Shall be thoroughly familiar with electrical construction materials and construction methods, testing of electrical equipments and installations, international codes and standards for electrical design, construction and testing of facilities and works.
Cvs shall be sent to Mr. M.A. Reji at reji@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647215
 
QC Inspector – Instrumentation
Graduate Engineer (B.Sc. Eng. / BE / B.Tech/HND) in Electronics / Instrumentation engineering. Minimum of 4 years of quality control and inspection experience in construction industries. Shall be thoroughly familiar with instrument construction materials and construction methods, testing of instrumentation and installations, international codes and standards for instrumentation design, construction and testing of facilities and works.
Cvs shall be sent to Mr. M.A. Reji at reji@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647215
 
QC Engineer (Mechanical & Electrical)
Graduate Engineer (IRCA registered) 4 years experience in relevant fields.
Cvs shall be sent to Mr. M.A. Reji at reji@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647215
 
Welding Engineer
Graduate Engineer (CSWIP / AWS) in Welding or shall be registered as European Federation Welding Engineer with 6 years of experience, 2 years of experience should have gained in Middle East preferably in PDO.
Cvs shall be sent to Mr. M.A. Reji at reji@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647215
 
Design Engineer
BE (Mech.) with 2 Years or Diploma in Mech. with 3 to 4 years experience in Design of vessels with knowledge on PVELITE Software, Heat exchangers, skid engineering, piping etc.
Cvs shall be sent to Mr. B.V. Srinivas at bvsrinivas@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647218
 
Jr. Proposal Engineer
BE (Mech.) with 2 Years or Diploma in Mech. with 3 to 4 years experience in Estimation & Proposals on Vessels, Heat exchangers, skid engineering, piping etc.
Cvs shall be sent to Mr. B.V. Srinivas at bvsrinivas@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647218
 
Draftsman
Diploma in Mech. with 3 to 4 years experience in Draughting – AutoCAD latest version on vessels, Heat exchangers, skid engineering, piping etc.
Cvs shall be sent to Mr. B.V. Srinivas at bvsrinivas@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647218
 
Doctor
MBBS with MOH License.
Cvs shall be sent to Mr. S. Mukharjee at mukharjeee@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647262
 
Cost Engineers
Degree/ Diploma in Technical Engineering Discipline. Certified as Cost Engineer by any Cost Engineering Council. Minimum 8 years experience out of which 5 years in oil and gas industry. Single focal point for cost engineering issues and responsible for building the cost estimates with activity allowance for
projects and/or maintenance services.
cvs shall be sent to Mr. O. M. Rejeesh at rejeesh@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647292
 
Industrial Hygienist
Degree in Technical Engineering Discipline. Msc/ Diploma in Industrial Hygiene and membership with an internationally accepted professional institute. Certified Industrial Hygienists (CIH) or Registered Occupational Hygienist (ROH) or equivalent. Minimum 10 years of experience in effective
implementation of systems to manage Occupational health and Hygiene programs. Undertake Health Risk Assessments and Human Factors Engineering Reviews for new projects.
cvs shall be sent to Mr. O. M. Rejeesh at rejeesh@stsoman.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Ph: 24647292

2 comments:

  1. You got a really useful blog I have been here reading for about an hour. I am a newbie and your success is very much an inspiration for me Asset Management Software And Barcode Tagging in Oman | Budget Planning in Oman

    ReplyDelete
  2. Well Said, you have furnished the right information that will be useful to anyone at all time. Thanks for sharing your Ideas.
    click here

    ReplyDelete